Test out the metal ring or bezel that goes around the face of the watch. The bezel requires some effort to rotate it around the dial. You’ll feel it move against the internal indents as you rotate it. There are usually indentations on the outer edge of the bezel to give you a firm grasp and make it easier to move.
If you like to wear your scuba watch on top of your wetsuit, check to make sure the strap will fit around the wetsuit that you usually wear. If it doesn’t fit, the watch maker might have included extensions to lengthen the strap.
It’s worth reading the manual. Today’s dive watches have a lot of functions that are practical, useful or just downright cool. Reading up on the details of your new watch is the best way to get the most out of it.
Make sure to thoroughly rinse your dive watch in fresh water after each dive. You should also rinse it after getting out of a pool to remove chlorine.
While you are rinsing your dive watch, turn the bezel—if your watch has one—to get rid of any sand, grit, etc. that might have gotten under the dial.
Scuba diving watches are waterproof thanks to rubber or plastic seals inside the watch. These gaskets will eventually deteriorate and affect the water resistance of your watch. Manufacturers suggest the gaskets be changed and/or inspected anywhere from every 28 to 36 months. If you dive frequently, have the watch pressure-tested and the gaskets changed/ inspected annually.
Extreme changes in temperature might affect the sealing capabilities of your dive watch.
Make sure the crown is either screwed in or pushed down all the way before getting in the water. Once in the water, don’t adjust the crown as water could accidentally seep in.
Do not expose watches to aerosol sprays, strong chemicals or solvents, which can damage or dry them out.
If you notice condensation under the crystal, take your watch to a professional immediately.
When you subscribe to the blog, we will send you an e-mail when there are new updates on the site so you wouldn't miss them.